|
WAMIQ GLASS
COLOUR
PRODUCTS
|
The Art of stained
glass painting has originated from ancient Rome. In which coloured
glass pieces were used to be cut, shaped and joint
together by molten led to form shapes and designs. This
difficult and time consuming art, now can be imitated by using
"Wamiq glass colour products".
By Using "Wamiq glass
colour products" you can give excellent look to almost any glass
utensil, mirror or plexiglass etc. It can also be used for
decorating metal marble and other hard surface. |
 |
| HOW TO START PAINTING
Wamiq glass products
are easy to use, just clear the glass/mirror surface of any
dust, grease or grime and then draw your design directly on to
the surface or trace out with the help of carbon
paper.
|
 |
USING RELIEF PAINT
LINER
To paint the out lines of your design apply relief
paint liner, which is available in 20 ml collapsible handy
tube, with a plastic nozzle whose whole can be varied by
cutting from different lengths. Relief paint liner is
available in Black, Silver and
Gold |
shades. The central parts
of the relieved painted work can then be filled with "Wamiq
Transparent and Crystalline glass colours". USING
TRANSPARENT GLASS
Apply a thin layer of colour
with a soft brush or glass dropper or you can also dip
your small objects to be painted in these colours. Before
painting add little "Wamiq glass colour Thinner so as to obtain
the proper flow and uniform layer of colours. Keep your painted
surface dust free till the colour is dry."
These colours are
available in 16 transparent, 4 Opaque (white, gold, silver and
copper) shades. These colours are intermixable with each other
to form new shades and tones and can also be over painted on
each other for this purpose, but only when the underlying
layer is completely dry. Tint medium (00) can be used to
reduce the concentration of any shade or can be used as a
clear varnish for applying glitters or other such material. It
gives clear glossy finish on drying. By mixing Opaque white
(01) in any shade you can create many new soft semi opaque
tones.
Wash your utensils and
brushes with thinner or white spirit after you finish your
work. USING CRYSTALLINE GLASS COLOURS
 |
The use of
Crystalline glass colours is almost same lime transparent
colours except for the fact that a thick layer have to be
applied so as to get good crystals.
Crystals start
forming after 5-10 minutes and the course completes in about | 30 minutes (slight variation in
timing can be observed due to temperature difference). While during painting and drying
keep your work away from direct blow of air (like fans etc.) a
so as to allow the colour dry naturally and give good
crystals.
All Artwork by
WAMIQ ENTERPRISES
|